Operating automatic polishing machine some experience tips

Visits:352

Automatic polishing machine has become a very important production equipment. The existence of such production equipment can make the product more ideal when producing multiple parts. In order to better understand the many parts of this type of equipment, polishing machine equipment in terms of operation is also important. It is understandable that many parts, such as deburring the finished product, surface polishing of the finished product and polishing and cleaning work, have become very important components in the process of using a specific polishing machine. Only after every part of the polishing machine manufacturer can be considered very carefully, people can better grasp all aspects of the product, but in operation, we must pay attention to some polishing operation details in order to improve the polishing efficiency, will explain for you the following points:

1. The wheel of the automatic polisher turns itself. Place the workpiece below the center axis of the grinding wheel. If this is not the case, the grinding wheel can easily detach from the workpiece.

2. Press the polishing wax on the polishing wheel, do not exert too much force, and make the polishing wheel rotate smoothly.

3. Protective cover: prevent flying objects from flying out and hurting people in the polishing process

4. After polishing, stop using a soft cloth dipped in talcum powder to wipe the outside. To remove wax, polishers are designed to dewax when necessary.

5. Gently touching the surface of the grinding wheel with a polishing machine can help to remove sharp angles from the appearance and add wax under desired conditions.

6. If there is too much wax, we can use professional tools to stop removal. If it doesn't work out, we can reapply the wax.

7. Check the circuit regularly every month. If it is damaged, please replace it immediately.

8. Check all components of the device periodically every month. If it is loose, reinforce it immediately. If there is any damage, please replace it immediately.

9. Regularly turn off the power supply of the main electrical control box, clean the box carefully, remove the metal powder with a vacuum cleaner, and check whether the signal light function is normal.

10. Make sure there is no damage to the active compressed air pipe and that the pressure gauge is functioning properly.

11. Dust near mechanical surfaces and polishing wheels should also be cleaned regularly. Dust on the polishing wheel usually remains during the polishing process. Long-term uncleanliness will increase the diffusion of dust in the process and affect the polishing effect.

12. Lubricate gears or bearings regularly.

13. Make sure there is no damage to the active compressed air pipe and that the pressure gauge is functioning properly.

14. Periodically check the running status of components and check whether components are damaged. Repair and replace damaged parts in time to ensure that it does not affect other parts and the operation of the whole machine.

15. Clean the inside of the equipment after work and keep it clean.

Previous:What are the precautions when using wet polishing machine?

Next None:Maintenance of sand belt machine